STR604D 60w x 4 pcs police fire ems useFor off road only / extremely bright!
0Omega Strobe Kit STR-604D 4 pc. Complete 60 watt x4 Piece Kit / Part # STR604D
Features
Overview: The Omega STR-60-4D "Police-type" Strobe Kit contains 4 strobe heads, a power supply, a 2-way switch, power and control harnesses, and 60' of 3-conductor wire for installing this system in your vehicle. The Strobe Kit can be used independently, or in conjunction with your car alarm. There are 8 different flashing patterns to choose from.
Power Supply: The power supply is the brains to the system. It has six 3-pin connectors for the power harness, control harness, and four strobe outputs. The strobes are wired in pairs which flash at different times, creating multiple patterns. Strobe 1 and 3 fire together, Strobe 2 and 4 fire together, and 1 & 3 alternate firing with 2 & 4. The power supply can accept an input voltage of 11 to 30 volts DC.
Strobe Heads: The Xenon strobe heads are designed to be installed in 1" diameter holes behind the lenses of your parking lights, fog lights, or other lights in the vehicle. If you are not installing them in existing lights, a 1" hole can be drilled and the heads inserted in place. Note: Please consult local and state regulations to keep your vehicle street legal.
Flash Patterns: The strobe kit allows you to select different flash patterns depending upon which wire in the control harness gets voltage. The 8 flash patterns are as follows:
| 1 | Shutdown |
| 2 | Quad Flash, (1 Alt 2) |
| 3 | Quad Flash, (3 Alt 4) |
| 4 | Quad Flash, (1&3 Alt 2&4) |
| 5 | Mega/Quintuple Flash, Hi/Lo Pwr (1&3 Alt 2&4) |
| 6 | Double Flash, (1 Alt 2) |
| 7 | Double Flash, (3 Alt 4) |
| 8 | Double Flash, (1&3 Alt 2&4) |
Wiring: The kit comes with four 15' shielded extension wires. These 3-conductor wires all have metal contact pins on the ends and can be easily inserted into the supplied socket or pin connectors. In addition, the cable shields can be connected to grounding points on the power supply. The only hardwiring required is for connecting the power and control harnesses to power/ground, the alarm and the switch. If you wish to have the capability of switching all the different flash patterns during operation, additional switches can be used. Note: No wiring is supplied from the battery to the power supply. You should use 18-gauge wire for runs up to 7 feet, 16-gauge wire for 7-14 foot runs, 14-gauge for 14-25' and 12-gauge for lengths of 25-35'. The power cable should also be fused at the battery connection.
Optional Wiring: The control and power harnesses are equipped with wires which can provide some extra options, if desired:
- Smart Security Function: The control harness contains a blue wire which can be connected to your car alarm's siren output. When the strobe kit is integrated into your alarm, the strobes will flash, creating an immense warning effect when the alarm is triggered.
- Low Power Option: The power harness' green wire allows you to operate your strobe kit in a low power mode, which can be useful for display cars or in a showroom. If not permanently connected, the green wire can be wired with the 2-way switch to turn on the low power mode or turn off low power and strobe at full brightness.
The STR-604D strobe kit will make your car stand out at car shows or the neighborhood block party. The waterproof kit includes four 60-watt bulbs, power supply, shielded connecting cables, and a dash-mountable control switch that lets you select from 15 different flash patterns.
The strobe kit can also add extra effectiveness to your vehicle's security system. The kit features a dedicated input that connects to your car's security system, so you can program bright flashing lights to activate when the alarm is triggered.
PR AK HI please add 6.00
